Questions & Answers for: points gap setting

points gap is 14 to 16 Thou. Inlet valves 4 thou, exhaust valves 6 thou. I dont know the settings in metric, so using a set of imperial feeler gauges, that measure in thousands of an inch. An easy tip

...points, I think the gap is set at .015 is that correct? Do you set the points when they are on the high or low side of the lobe ? ed Yes, the point gap is .015 There is a line etched on the face of ...

...degrees dwell,but setting the point gap at 18 thousands of an inch work well,then adjust the timing. dwell changes timing but timing does not change dwell,so adjust the points first then set the ...

...points gap and plug gap. "My I&T manual says .021 point gap and .025 plug gap." There's a lot more information on the MF 135 on the web. Just do a search ' MF 135"; "massey ferguson 135 perkins ...

points gap 305 smal block hi need to no the settings of points gap and plugs on smal block chevy impala thank steve Set your points gap using a dwell meter - 30 degrees (range 28 to 32 degrees). Spark

Many have started using .035 as it is easier to set using most newer tools. Point Gap is .016 inch. You may also set point gap by using a dwell meter if you have one. That setting would be 32 degrees

...points gap? Points gap was used before electronic ignition. The "points" were a set of contacts found under the distributor cap and rode a cam that opened and closed them at the firing point you set ...

...gap and dwell angle the closer the points the bigger the dwell and conversely the bigger the gap the smaller the dwell angle in a distributor the point gap of 18 would have a large dwell angle and ...

...points gap and spark plug gap Below are the Prestolite distributor settings. Point "gap" is merely the initial setting to get the engine running, at which point you will need either a dwell meter, a ...

Points gap setting on a 1979 Dodge 360 Van D200? Need the points gap setting on a 1979 Dodge 360 Van D200. Thanks Mopar plugs are gapped at .035, while points are .020 for /6 and .017 for all V8s. You